Disposable Bipolar Plasma Plasma Surgery Probe Bipolar Turp Wand Low Temperature

Bipolar Plasma Plasma Surgery System BPH Surgery Probe Bipolar TURP Wand

Product Introduction

PLA201 is a bipolar plasma probe which is using with PLA-600 Urology Plasma Surgery System, into the treatment of TURP, BPH, Bladder tumor etc.. It has the function of cutting, ablation, hemostasis and coagulation.

Product Tip Picture

Product Character

• Really exfoliate along the cavity of the surgical capsule
• Block blood flow thoroughly, clear vision, clear boundaries, not easy to accidental injury
• The glands are completely removed without trimming the tip, which is not easy to cause urinary incontinence. There will be some patients with pseudo-urinary incontinence, which will return to normal within 3 months after surgery

Product Advanatages

• Safety: multi-polar design, change the traditional way that current flow through human body
• Low Temperature: 40 to 70 centigrade during operation, decrease the thermal damage to around normal tissue
• Precise cutting: the thin plasma layer make precise cutting becoming true, and it will not hurt the around normal tissue
• Speedy cutting: cutting and coagulation at the same time, no need to change the probe frequently, saving operation time
• Shorten recovery period: less hurt to human body, recovery faster

System Set Up

System Component 

1). One tabletop generator device

2). One reusable and non-sterile power supply cable.

3). One reusable and non-sterile footswitch.

4). One reusable and non-sterile treatment handle which is for foot control.

5). Treatment probes.

Anesthesia

Epidural anesthesia is usually used. You can also choose spinal anesthesia or general anesthesia.

Cutting Principle

Relying on the mechanical kinetic energy of the plasma in the electric field, it hits the molecular bonds (40-70 ° C) of the target tissue to lyse and ablate. The thermal damage depth is less than 0.5mm, and the trauma to normal adjacent tissues is small.

Storage Condition

This device should be stored in a well-ventilated room without corrosive gas. The height above ground and the distance from wall should be above 30cm. Stack limit is 6 cases. Before being stored for a long time, it should be cleaned thoroughly for proper packing and storage. And it should also be taken out for power up every year, in order to avoid it from moisture, mildew or even damage. The suitable weather and environment condition is as below:

1. Temperature: -40℃～+55℃;

2. Relative humidity: ≤90％;

3. Atmospheric pressure: 50kPa～106kPa